 |
Features
DENSO QD20 QR Code Scanner is a stationary scanner that brings out of the power of system automation. With the entire lineup replete with enhanced functions, it is ideal for production life efficiency.
Reading of direct marking 2D code
Using the latest image processing technology, the decoder can read direct marking 2D code as well as labels reliably. In addition, thanks to simple setting with a mouse, parts tractability management can be achieved with ease.
Full adjustment functions
Test mode function is employed to make sure of error correction number of QR Code and display detailed code information, which enables secure setup. Illumination distribution function is employed to choose the most suitable illumination conditions .
Picture memory function
It is employed to analyze and adjust the detailed cause of failure or defects, saving up to 10 reading failure pictures.
General Specifications
| Scanner |
Readable code |
2D code |
QR Code, Micro QR Code, PDF417, Data Matrix (ECC200) |
| 1D code |
UPC-A/E, AEAN-13/8, ACODE39, ANW7, AITF, ACODE128 |
| Angle |
360?/font> |
| Camera |
Original camera (VGA/1) |
| Function |
Picture memory |
Max 10 frames (640x480) |
| Monitor display |
Gray/2 value picture, A setup menu, A reading result |
| Operation |
Monitor Input |
NTSC/EIA |
| Console Input |
PS/2 mouse interface (invertible) |
| Outside Input & Output |
Input |
3 (trigger, mode1, mode2) |
| Output |
4 (OK, NG, outside illumination synchronous signal, option) |
| Communication Interface |
Method |
RS232C |
| Speed |
Max 115.2kbps |
| Connector |
D-sub9 pin (male) |
| Power |
Voltage |
DC24V, 1A |
| Environmental Conditions |
Temperature |
0 - 50癈 |
| Environmental Performance |
Humidity |
10 - 85% RH (without dews) |
| Weight |
510g |
|
